9
8
7
Description
1. Manual/Auto range indicators, MANUAL refers to the measuring range in manual
operation mode and AUTO refers to the measuring range in automatic operation
mode.
2. Measurement mode indicators:
A
------
V
------
R
------
------
------
C
------
3. Range.
4. Measurement display ("OL" is short for overload, indicates the reading exceeds the
display range)
5. Data hold mode is enabled.
6. Multimeter recorder.
7. The reference value of the relative measurement.
8. Range of measuring current: mA or 10A.
9. AC or DC when measuring current or voltage.
6. Communication with PC
The oscilloscope supports communications with a PC through USB, LAN port or Wi-Fi.
You can use the Oscilloscope communication software to store, analyze, display the data
and remote control.
To learn about how to operate the software, you can push F1 in the software to open the
help document.
Here is how to connect with PC. First, install the Oscilloscope communication software on
the supplied CD. Then there are several ways of connection to choose from.
6.Communication with PC
1
Figure 5-3 Multimeter Information Window
Current measurement
Voltage measurement
Resistance measurement
Diode measurement
Continuity test
Capacitance measurement
2
3
26
4
5
6