Boiler Descaling; Settings; Language - Electrolux SkyLine PremiumS User Manual

• The display shows the pop-up window "Forced cleaning": it is
necessary to perform one of the automatic cleaning cycles.
MANUAL
1
Oven must be cleaned. Launch a
160
cleaning cycle before cooking.
00:30
• At the conclusion of the selected cleaning cycle, the pop-up
window disappears; the cooking functionality is now restored.
To enable/disable this function and/or change the time limit to
force a cleaning see Cleaning – Advanced functions section in
F.17 SETTINGS chapter.
F.16.2

BOILER DESCALING

During the routine washing cycle with solid chemicals (Rinse and
Descale blue tabs) the boiler is maintained scale free. However,
in case of excessive scale in the boiler the display may show a
message with "dESC" error code signalling the need to carry out
a descaling.
• Run a cleaning program including the rinse and descale cycle
and use 2 tabs "C25" only for 6-10 grids models and 3 tablets
only for 20 grids models instead of the usual quantity.
IMPORTANT
When performing the cleaning cycle with 2 tablets
(or 3 tablets depending on the model) of "C25" do
not activate GREEN SPIRIT – ECONOMIZER
function.
IMPORTANT
Always skipping the Rinse Aid and Boiler Descale
phase may lead to lime build up in the boiler. After a
certain time, the oven disables this feature and
asks for a complete cleaning programme with solid
chemical in order to descale the boiler.
• If, after carrying out the cleaning cycle, the display shows a
message about boiler maintenance, call Service.
MANUAL
Boiler maintenance
The specialized personnel will descale the boiler by means of
a dedicated cycle.
IMPORTANT
The manufacturer declines any liability if these
prescriptions are not respected;
Also, the warranty does not cover the repair or
replacement of components damaged by scale when-
ever the required supply water characteristics are not
respected.
56
i
20
%
Forced cleaning
° C
:00
...
F.17

SETTINGS

"Settings" mode allows to change some usage parameters of the
oven.
1. Open the upper drawer and select Settings;
MANUAL
1
50 %
160
°C
00:30
:00
2. The display shows the main menu with ALL SETTINGS;
SETTINGS
All settings

Language

Date
18
Time
Measurement units
Sounds
Cavity light
Display
Touch screen calibration
Touch screen test
Food safety
Autostart
Default setting
If it is required to restore the factory setting, proceed ad follows:
1. Open the lower drawer and select the related icon;
SETTINGS
All settings
Language
Date
18
Time
Measurement units
Sounds
Cavity light
Display
Touch screen calibration
Touch screen test
Food safety
Autostart
Restore
factory
Manual
settings
6:30 100% 300°C 120°C
PM
2. Confirm restoring to close the pop-up window.
F.17.1 LANGUAGE
Language
This parameter allows to customize all menus in the selected
language.
• Touch the flag icon;
• The display shows all settings in the required language.
Manual Automatic Programs
20
%
50%
SkyHub Cleaning Settings
°C
?
160°C
Help Agenda
01 20 : Plan & Usb
save
:00
01:20 h:m
SETTINGS
All settings
Manual
Automatic
Programs
MultiTimer
SkyHub
Cleaning
Green Spirit
Accessories
Startup page
ID
Identity card
User Password
SETTINGS
All settings
i
Language
Default settings
Date
18
Time Confirm restoring default settings
on the oven? All actual settings
Measurement units will be lost.
Sounds
Cavity light
Display
Touch screen calibration
Touch screen test
Food safety
Autostart
Default
settings
Manual
6:30 100% 300°C 120°C
PM