Forced Cleaning - Electrolux SkyLine PremiumS User Manual

WARNING
In case of steam leakages from
the cavity door and/or visible
wearing or damage of cavity door
gasket, do not start any cleaning
cycle.
Call the Customer Care Service.
Special conditions – Display status
• Running cycle
During the cycle the display shows:
– the remaining time
– the duration of the set cycle
Medium cleaning
01 39
01:40 h:m
• Cycle stop
Keep hold button to stop the cycle;
The Stop button will be available only when the program is
running. After the selection the display will show the remaining
time for rinsing the cavity and the boiler.
Extra strong
Rinse
Keep hold to stop the cycle
• Forced rinse
If you have stopped a running cleaning cycle, the appliance
may proceed to perform a forced rinse to wash out all the
chemicals from the cavity.
CLEANING
Please wait while the cavity
is being rinsed. Please do not
open the door or switch off the
0459
During this time the door cannot be opened.
Do not open the door!
:
: 9 5
02:50 h:m
00:45 h:m
x 3
Load solid chemicals
Forced rinsing
appliance.
:
05:00 m:s
End of cycle
• Cleaning done: info on consumptions (see example in a
Gas model, the data are purely indicative).
CLEANING
Medium cleaning
The display may show up a message about an anomaly with
chemicals loading during the cleaning cycle. In this case:
– verify if there are undissolved tablets in the cleaning
drawer;
– if present, remove them before using the oven for cooking.
Legenda
Electric consumption in kWh
Gas consumption in m
Water consumption in litres
Detergent consumption in tablets
Rinse-aid consumption in tablets
Detergents consumption in litres
Descaling agent consumption
Time consumption in hours : minutes : seconds
F.16.1

FORCED CLEANING

This function measures the oven cooking time elapsed from the
last automatic cleaning cycle. If the limit is reached (the default
value is 24h), no further cooking cycle is allowed.
done!
01:59:35
3
0.8 m
119 l
3
55