Electrolux SKYLINE OVEN 6-10-20GN Service Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Oven
  5. SKYLINE OVEN 6-10-20GN
  6. Service manual

Electrolux SKYLINE OVEN 6-10-20GN Service Manual

Electronic boards
Hide thumbs Also See for SKYLINE OVEN 6-10-20GN:
Table of Contents

Advertisement

Quick Links

ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN
SERVICE MANUAL
ELECTRONIC BOARDS
SKYLINE OVEN 6-10-20GN
MAGISTAR OVEN 6-10-20GN
Document made by Product Care – Technical Training & Service – Vallenoncello PN/Italy
All the images and information of this document are property of ©Electrolux Professional Spa. This document
and all of its contents cannot be copied or used, in part or entirely without the written authorization of Electrolux
Professional Spa.
©Electrolux Professional Spa.
Doc. N. 595404A00
Edition 4 – 01 / 2020

Advertisement

Table of Contents
loading

Related Manuals for Electrolux SKYLINE OVEN 6-10-20GN

Summary of Contents for Electrolux SKYLINE OVEN 6-10-20GN

  • Page 1 Document made by Product Care – Technical Training & Service – Vallenoncello PN/Italy All the images and information of this document are property of ©Electrolux Professional Spa. This document and all of its contents cannot be copied or used, in part or entirely without the written authorization of Electrolux Professional Spa.
  • Page 2 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 REVISIONS UPDATE: EDITION SERVICE DESCRIPTION DATE MANUAL First edition of service manual relative to SETTINGS & SOFTWARE , 1.00 Nov. 2019 TOUCH / DIGIT electronic boards Update of the S.M for new software version 4.3.7 on TOUCH ovens; Some updates to Digit too.
  • Page 3 MODEL LEGEND EXAMPLE: Model for Zanussi LW THIS MANUAL CAN BE FOUND AT- Model for Alpeninox/Multibrand LW TACHET TO: Model for Horecaland (Diamond) Model for Electrolux LW PNC : 217782 Combi Electric FACTORY MODEL : 6 GRIDS 1/1 ECOG101T2G0 6 GRIDS 2/1...
  • Page 4 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 BAKERY (40X60) VARIANTS (WASH, PROBE, SHELVES) WASHING Refer also to § DATA PLATE (IDENTIFICATION STICKER)
  • Page 5 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 NDEX 1 GENERAL INFORMATION .......................... 7 GENERAL INFORMATION ......................... 7 SAFETY INFORMATION/PRECAUTIONS ................... 8 PERSONAL PROTECTION EQUIPMENT ................... 8 GENERAL INFORMATION ......................9 RESIDUAL RISKS ........................9 CONTROL PANEL INTERFACES ...................... 11 TOUCH SCREEN INTERFACE (LEVEL T,K) ................
  • Page 6 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.4 PROGRAMMING FILE UPLOAD ..................39 2.2.2.5 PROGRAMMING PARAMETERS UPLOAD ..............40 2.2.2.6 PNC & SER (pncSerial.json) UPLOAD ................42 UTILITIES ACTIVATED WITH OVEN ON .................. 47 2.2.3.1 CAVITY TEMPERATURE / HUMIDITY ................47 LEVEL B, C (DIGIT) ...........................

  • Page 7: General Information

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SOFTWARE UP TO 1.0.11 ......................94 5 ELECTRICAL WIRING DIAGRAM ......................96 GAS APPLIANCE ..........................96 ELECTRIC APPLIANCE ........................100 GENERAL INFORMATION GENERAL INFORMATION To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation.

  • Page 8: Safety Information/Precautions

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SAFETY INFORMATION/PRECAUTIONS Risks mainly of a mechanical, thermal and electrical nature exist in the machine. Where possible the risks have been neutralised: directly, by means of adequate design solutions. indirectly by using guards, protection and safety devices. During maintenance several risks remain, as these could not be eliminated, and must be neutralised by adopting specific measures and precautions.

  • Page 9: Residual Risks

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 During these operations, the worn gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure to damage to health (depending on the model) GENERAL INFORMATION •...
  • Page 10 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 The operator for normal machine use could suddenly and deliber- Sudden closing of the lid/ door/oven door (if pre- ately close the lid/door/oven door (if present, depending on the ap- sent, depending on the appliance type) pliance type) When handling the machine or the packing containing it, using un- Tipping of loads...
  • Page 11 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 CONTROL PANEL INTERFACES There are two type of user interfaces (U.I) : Level B,C are DIGIT (buttons) Level T, K are TOUCH (touch screen) TOUCH SCREEN INTERFACE (LEVEL T,K) A.Control panel screen B.ON/OFF button C.USB key in/out D.Print out...
  • Page 12 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 DIGIT DISPLAY (LEVEL B, C) Level B ( with boiler) & C (appliance without boiler / boilerless) A.Control panel screen B.ON/OFF button C.USB key in/out D.Print out E.Openable flap A.Cooking cycles B.Cooking parameters C.Cooking option D.Special functions E.Utilities...
  • Page 13 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ELECTRONIC BOARD INTERACTIONS...
  • Page 14 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SETTINGS ELECTRONIC BOARDS The following chapters are intended only for authorized technicians / engineers. WARNING ! Take GREAT CARE when connecting / testing anything with live current, if you are unsure what you are doing and how to use your equipment safely, then DON'T DO IT.
  • Page 15 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 LEVEL T, K (TOUCH SCREEN) IMPORTANT ! 4.3.7 The following instructions/illustrations are relative to software . on- wards. Previous software editions could differ to what is reported in this manual edition. A complete list of all the available software editions released in the markert can be found at § SOFTWARE EDITIONS SETTINGS AND SERVICE AREA...
  • Page 16 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Highlighted chapters useful technician settings 2.2.1.1 DISPLAY / TOUCHSCREEN CALIBRATION...
  • Page 17 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.2 CLEANING Before starting any washing cycle the appliance will check the inner cavity temperature, if the inner temperature is too hot the appliance will proceed to a "Forced cooling" Cycle stop Keep hold to stop the cy- cle;The Stop button will be available when the function can be performed.
  • Page 18 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 EXAMPLE ONE EXAMPLE TWO EXAMPLE TWO: after adding in the accessory / pa- rameter 45/47/55 etc in the Accesso- ries menu the new items will be avail- able to enable. IMPORTANT ! In case you update the oven software or the parameters, the accessories list will be reset;...
  • Page 19 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Oven identity card EXAMPLES U.I App version 4.3.3, is to be considered the “software “ of the oven. NOTE ! IN THE WEB SITE YOU WILL ALWAYS FIND THE LATEST EDITIONS OF SOFTWARE AVAILABLE Refer to the latest edition name of the software (programming file) edition or date publication from the official TechDoc web pages.
  • Page 20 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5 SERVICE “Service” will be accessed through password in Settings->Service. Once the password is correctly entered the “Service” credentials will be active for 15 minutes while navigating the interface. The 15 minutes timeout is continually reset while the appliance is in running state and every time the interface detects a touch.

  • Page 21: Alarm Logs

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5.1 ENVIRONMENTS 2.2.1.5.2 ALARM LOGS 2.2.1.5.3 TECHNICAL SERVICE ID...
  • Page 22 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5.4 APPLIANCE PARAMETERS T, K (TOUCH SCREEN) / LIST The parameter lists are available in a separate document for authorized technicians on the web sites (PRIDE- SERVICE PORTAL- AGELUX etc..) In case of any doubt, refer to your local country customer care. Identification of parameter and value to set or change.
  • Page 23 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5.5 COUNTERS Here it is possible check the time and cycle used in the units, as: -How many cycle used -How many hours used -Reset all counter COUNTERS ED3 DRAFT, in attesa info da Luca G. Counter COUNTER NAME Mnemonic...
  • Page 24 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Counter COUNTER NAME Mnemonic Description CNT_DRAWER_LOADING_ACTIVATIONS CdLA drawer loading valve activations (EV11) CNT_HH_DRAWER_LOADING_ACTIVE CHdL drawer loading valve active time (EV11) CNT_DRAWER_DRAIN_ACTIVATIONS CddA drawer drain valve activations (EV12) CNT_HH_DRAWER_DRAIN_ACTIVE CHdd drawer drain valve active time (EV12) CNT_RECIRC_PUMP_ACTIVATIONS CrPA recirculating pump activations (M8)

  • Page 25: Lambda Probe Calibration

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Counters available/shown only if accessory is enabled/present. Counter COUNTER NAME Mnemonic Description As CNT_HH_BOILER_ON, but from the last time the CNT_HH_BOILER_ON_FROM_DRAIN CHbd safety boiler probe has not detected water CNT_CLN_GF2 CCG2 Counter cleaning cycles with green feature 2 active CNT_CLN_GF3 CCG3 Counter cleaning cycles with green feature 3 active...
  • Page 26 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5.7 RESTORE AUTOMATIC MODE 2.2.1.5.8 CLEAR PROGRAM MODE, MULTI TIMER DATA...
  • Page 27 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.5.9 BOILER MANTENANCE / DESCALE During the routine washing cycles carried out with the suggested chemicals (rinse & descale tablets) the boiler is maintained scale free (refer to the amount and type of detergent/rinse aid to use as indicated at §WASH CYCLES / DETERGENTS / DESCALE).
  • Page 28 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.1.6 BY-PASS ENVIRONMENT Once you are logged as SERVICE § SETTINGS AND SERVICE AREA the By-Pass environment is auto- matically available in the secondary menu of the home page. Note: In case that the “START BY- PASS”...
  • Page 29 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2-Manually load PNC & SERIAL file: “Load” into the U.I the § PNC & SER UPLOAD (pncSerial.json) U.I. SPARE PART different type of files Press “load” the “Pnc & Serrial loaded” should display. 2.2.1.7 USB TRANSFER AMBIENT ( SERVICE FUNCTIONS) The USB Transfer ambient is used to manage data transfer between UI and a USB key.
  • Page 30 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SERVICE credentials:.To obtain the complete service functions of the usb transfer ambient it will first be necessary to log into the service area like described in § SETTINGS AND SERVICE AREA SERVICE Once that you have logged into the service area press the "back arrow"...

  • Page 31: Recovery Mode

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 “USER credentials” (chef or generic user) VIEW OF USB AREA “User credentials” are active, the space is left blank. 2.2.1.8 RECOVERY MODE The recovery mode is an automatic function of the appliance, it will start in case that a part of the appliance (like the convection / boiler etc) cannot function.
  • Page 32 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SOFTWARE UPDATE LEVEL T,K ( TOUCH SCREEN) for a complete list of the different editions of software available “in Refer also to § SOFTWARE EDITIONS the market”. IMPORTANT ! 4.3.7. The following instructions/illustrations are relative to software onwards.
  • Page 33 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.1 AGELUX WEB SITE - EXAMPLE ILLUSTRATION Programming File Programming Parameters Pnc 217782 touch oven / GAS Pnc & Ser upload (pncSerial.json) View of the json file.
  • Page 34 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.2 PRIDE WEB SITE - EXAMPLE ILLUSTRATION Programming File Programming Parameters NOTE: The files are specific for each PNC there- fore you must download a Programming File or Programming Parameters dedicated for the exact required PNC that you need to update!!.;...
  • Page 35 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.3 UNZIPPING 2.2.2.3.1 - PRIDE/ FIREFOX UNZIPPING Click on one of the files Double click on the file Now will appear a dialog box for the download; depending on the unzipping program you have installed on your PC the view could change.
  • Page 36 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Double click the downloaded folder, you will see a list of COMPRESSED files, press “EXTRACT ALL”, the files must be moved to the root of your USB KEY press “EXTRACT ALL”, select the root of your USB KEY...
  • Page 37 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Final appearance of the UNZIPPED USB KEY. NOTE that in the above picture we have already downloaded/unzipped into the usb key (drive) the P.P (pro- gramming parameters) file. The P.P and P.F, do not interfere between each other and during installation will both be installed at the same time with the same action.
  • Page 38 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.3.2 - PRIDE/ INTERNET EXPLORER UNZIPPING Click on one of the files Double click on the file Now will appear a dialog box for the download; depending on the unzipping program you have installed on your PC the view could change.
  • Page 39 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.4 PROGRAMMING FILE UPLOAD The Programming file (that from now on we will call P.F. as abbreviation) is the software application of the oven and this is stored in the U.I. The P.F. will update the soft- ware edition refer to the UI App version at chapter §...
  • Page 40 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.5 PROGRAMMING PARAMETERS UPLOAD By loading the programming parameters, the oven is set to the factory values as it exits the produc- tion line. If you have updated a P.F it is MANDATORY to update also the P.P. Be sure if: -some ACCESSORIES are installed, it is necessary to re-enable the related parameters!!! Refer to the accessory installing instructions for the correct parameters set up (SkyDuo, Hood, Grease collector kit,...
  • Page 41 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 42 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.2.2.6 PNC & SER (pncSerial.json) UPLOAD This procedure is requested when replacing a spare part U.I; the PNC-SER § OVEN IDENTITY CARD is not written into replacement/spare part boards and this info is needed for SKY DUO/CONNECTIVITY. In case that we have to replace an user board (U.I) it will be necessary to upload into the new board the Programming file, Programming Parameters files (refer to previous chapters) and also upload the pncSe- rial.json.
  • Page 43 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Double click to unzip and locally save the “pncSerial.json” into your USB key in the root. It is preferable to have the following USB type: USB TYPE 2.0 8Gb or 16Gb FAT 32 FORMATTED. Be carefull to MAINTAIN the extension “...
  • Page 44 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Open the pncSerial.json just saved onto your USB key with “notepad”; you should see an empty file like this: Insert into the notepad file your data of PNC and SER that you can read on the oven identification sticker data plate, be carefull to respect all characters and the five spaces as indicated in the description.
  • Page 45 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Once that the data has been inserted correctly save the file with the “.JSON ” extension back to the USB Key “JSON” extension GOOD HOW TO INSTALL UPDATE PNC & SER (pncSerial.json): With the oven turned on, insert your USB Key into the main port, enter into the §...
  • Page 46 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Complete the software installation by turning the oven Turn OFF/ ON The oven Crosscheck that the PNC and SER have been written into the identity card by enetering into the § SETTINGS AND SERVICE AREA , accessible in the main screen view by pressing the menu drop down menu.
  • Page 47 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 UTILITIES ACTIVATED WITH OVEN ON These functions can be accessed directly from the user board without entering service area, the access is granted when the appliance is turned ON 2.2.3.1 CAVITY TEMPERATURE / HUMIDITY *HUMIDITY VALUE Appliance turned ON, cycles must be active to see humidity level* only for appliances...

  • Page 48: Service Area

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 LEVEL B, C (DIGIT) IMPORTANT ! The following instructions/illustrations are relative to software 1.1.2 on- wards. Previous software editions could differ to what is reported in this manual edition. A complete list of all the available software editions released in the markert can be found at § SOFTWARE EDITIONS SERVICE AREA...
  • Page 49 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.1 APPLIANCE PARAMETERS (APPL PAr) The complete parameter list can be found at - PARAMETERS LIST CHART FOR ALL LEVEL (T,K ; B,C) Once entered into the service area By pressing " "...
  • Page 50 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.2 COUNTERS (COUntErS) Once entered into the dedicated “Service area ”, scroll until:...
  • Page 51 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.2.1 COUNTER LIST DETAIL If you download the counters ,on your USB key will be saved a TXT file. Open the TXT to read the saved counter data: ========================================================== *** MACHINE USE COUNTER *** 21/01/2020 10:45 Appliance Description : Combi Oven With Digital UI Product Number Code...
  • Page 52 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 OTHER COUNTERS: C11 = 3 : CEGA - Number of quenching solenoid valve EV2 activations C12 = 0 : CHoA - Total quenching solenoid valve EV2 activation time (min) C17 = 0 : CbFA - Number of boiler filling solenoid valve EV5 activations C18 = 0 : CHbF - Total boiler filling solenoid valve EV5 activation time (min) C25 =...
  • Page 53 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.4 CLEAN TABLE (CLN tAbL) Once entered into the dedicated “Service area ”, scroll until: To START cycle...
  • Page 54 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.5 HACCP LOG (HACP LOG) Once entered into the dedicated “Service area ”, scroll until:...
  • Page 55 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.6 PROGRAMS, CHEF RECIPES (PrOG) Once entered into the dedicated “Service area ”, scroll until:...
  • Page 56 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.7 ALARM LOG (ALrM LOG) Once entered into the dedicated “Service area ”, scroll until:...
  • Page 57 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.8 NIU (WIFI MANAGEMENT) In preparation to the connectivity services that will be developed in the next SW version, the Wi-Fi NIU board management has been implemented as follow. NIU management and related services are enabled by parameter “352: Conn”. NOTE ! SINCE DIGIT MODELS ARE SOLD WITHOUT THE NIU IT IS NECESSARY TO SET THIS PA- RAMETER TO 0 “zero”, OTHERWISE AN ERROR “E160: NIU1 = COMMUNICATION IMPOS-...
  • Page 58 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.1.9 IDENTITY CARD (APPL dAtA) Once entered into the dedicated “Service area ”, scroll until: The firmware of the USER / ACU / INVERTER electronic boards can be read...
  • Page 59 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 SOFTWARE UPDATE B,C ( DIGIT) for a complete list of the different editions of software available “in Refer also to § SOFTWARE EDITIONS the market”. IMPORTANT ! 1.1.2 The following instructions/illustrations are relative to software wards.
  • Page 60 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.2.2 PRIDE WEB SITE - EXAMPLE ILLUSTRATION Programming File Programming Parameters 217882 digit oven / GAS NOTE: The files are specific for each PNC therefore you must download a Programming File or Pro- gramming Parameters dedicated for the exact re- quired PNC that you need to update!!.;...
  • Page 61 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.2.3 UNZIPPING 2.3.2.3.1 - PRIDE/ FIREFOX UNZIPPING Click on one of the files Double click on the file Now will appear a dialog box for the download; depending on the unzipping program you have installed on your PC the view could change.
  • Page 62 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Double click the downloaded folder, you will see a list of COMPRESSED files, press “EXTRACT ALL”, the files must be moved to the root of your USB KEY press “EXTRACT ALL”, select the root of your USB KEY...
  • Page 63 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Final appearance of the UNZIPPED USB KEY. NOTE that in the above picture we have already downloaded/unzipped into the usb key (drive) the P.P and P.F (programming parameters/programming file) . The P.P and P.F, do not interfere between each other and during installation will both be installed at the same time with the same action.
  • Page 64 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 2.3.2.3.2 - PRIDE/ INTERNET EXPLORER UNZIPPING Click on one of the files Double click on the file Now will appear a dialog box for the download; depending on the unzipping program you have installed on your PC the view could change.
  • Page 65 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 UPLOAD PROGRAMMING FILE & PROGRAMMING PARAMETERS The Programming File and Programming Parameter (that from now on we will call P.F and P.P.as abbreviation) are the software packages of the oven. Only for DIGIT electronic boards the packages can be installed in the same way and at the same time/together!! IMPORTANT ! Update of software 1.0.2 &...
  • Page 66 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 BOILER ORDINARY MAINTENANCE / DESCALE During the routine washing cycles carried out with the suggested chemicals (rinse & descale blue tablets) the boiler is maintained scale free (refer to the amount and type of detergent/rinse aid to use as indicated at WASH CYCLES / DETERGENTS / DESCALE).
  • Page 67 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 BOILER EXTRAORDINARY DESCALE CYCLE During the routine washing cycles carried out with the suggested chemicals (rinse & descale tablets) the boiler is maintained scale free (refer to the amount and type of detergent/rinse aid to use as indicated at § WASH CYCLES / DETERGENTS / DESCALE.
  • Page 68 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ACCESSORIES, ENABLE IN PARAMETERS NOTE ! IN THE ACCESSORY PACKAGING BOX IS CONTAINED A DEDICATED MANUAL WITH DE- TAILED EXPLANATION If any accessories are added to an oven, it may be necessary to enable the item: First it will be necessary to enter into the parameter list and “add in/enable”...
  • Page 69 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 - PARAMETERS LIST CHART FOR ALL LEVEL (T,K ; B,C) The visible parameter list is enclosed in this service manual chapter, but the complete list is made up of over 400 different parameters, many of these hidden parameters are “special” and cannot be manually adjusted by the technicians.
  • Page 70 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ram- Mne- Short Descrip- Long Description Table faul eter monic tion Minimum temperature Unsigned word temperature type parameter which sets the minimum trMn to use water in cool cavity temperature at which is allowed to use water to cool down the down cavity Advanced recovery...
  • Page 71 5, G31 Pro- pane/LPG 6,G20 Methane USA 7,LPG USA 8 … 12, "Not used" {0, “Electrolux”} Selects the brand of the {1, “Zanussi”} appliance. This selec- Selects the brand of the appliance. This selection impacts on function BrAn {2, “Diamond”}...
  • Page 72 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ram- Mne- Short Descrip- Long Description Table faul eter monic tion {0, "Not installed”} {1, “Level 1”} Select the hood level {2, “Level 2”} Hood Select the hood level installed installed {3, “Level 3”} {4, “Level 4”} {0, "Disabled} rtCE...
  • Page 73 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ram- Mne- Short Descrip- Long Description Table faul eter monic tion Boiler temperature to bPHt Boiler temperature to be kept in stop mode be kept in stop mode User HACCP data log tPrn User HACCP data log sample time.
  • Page 74 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 USER INTERFACE (UI) TOUCH/DIGIT & ACU DESCRIPTION The user board UI, of Touch or Digit electronic boards are supplied trough relay KSM that is activated with the ON/OFF button SM. Phase and Neutral (L/N) will arrive to the Switching feeders SMPS 12V and 24V that then will supply voltage to their X14 &...
  • Page 75 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 CONNECTOR FUNCTION NOTES BATTERY CR2032 DATE / TIME MEMORY ON / OFF 12V AND 0/1 SWITCH STATE U9 CONTROL NOT USED / EMPTY J7 is CONNECTED TO ACU (POWER BOARD) INTO ANY PMACS X27 CONNECTOR .
  • Page 76 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 U.I LEVEL B,C (DIGIT) If the user interface (user board) cannot comunicate with any other board for more than a determinated time (ex 15") any running cooking cycle will be stopped. The error icon will show a message "ECom". No cooking cycle can be launched till the comunication is established again.
  • Page 77 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 A.C.U LEVEL T,K,B,C (POWER BOARD)
  • Page 78 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...

  • Page 79: Troubleshooting

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 TROUBLESHOOTING The following chapters are intended only for authorized technicians / engineers. Action for Service : Not all of the Service action tips have functioning links, as some troubleshooting tips chapters are inserted into the Service Manual relative to the appliance; these specific S.M’s are available for authorized technicians on the web sites (PRIDE-SERVICE PORTAL- AGELUX etc..) and can be downloaded in file.
  • Page 80 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly Check cleanness of vent valve. Check X35 & X46 on ACU ;§A.C.U LEVEL T,K,B,C (POWER BOARD) Ver- Error, excessive The oven has detected a problem ify harness continuity and connectors time on opening with cavity vent operation.
  • Page 81 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly The panel has been Unscrew a little bit some of the fixing screws of N°101 Stops panel buttons is Press all buttons to possibly un- accidentally hit or dam- the UI board §LEVEL B, C (DIGIT) .
  • Page 82 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly blocks cycle Check thermocouple signal Cavity temperature sensor failure. §THERMOCOUPLE PROBES TYPE “ K ” (unless the Bottom cavity Connector failure;...
  • Page 83 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly Temperature too high on elec- Activates at 75C°. Temperature too high on elec- tronic boards compartment. Check tronic boards compartment. Check room temper- Stops Component room temperature considering the...
  • Page 84 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Instructions to Anomaly Description Possible causes Action for Service anomaly User Fix the short-circuit in case it is related to Pinched wire (line between inverter and mo- the harness. N°450 Stops ma- Lower Motor tor).

  • Page 85: Inverter Replacement

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Instruc- Type of Anomaly Description Possible causes tions to Action for Service* anomaly User Call service. It might be Detecion mode: Power Supply Voltage > required to N°463 Stops ma- Lower Inverter 300Vac Issue with external power supply call the elec-...
  • Page 86 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly FRAM blocks ma- power fail data Software error: invalid data on N°106 chine; fatal calculated MD5 FRAM memory. FrMC error is different as Call service the stored one...
  • Page 87 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly Fix the short-circuit in case it is re- Pinched wire (line between inverter and lated to the harness. N°400 Stops Upper Motor motor).
  • Page 88 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Instructions Anomaly Description Possible causes Action for Service anomaly User Check power supply stable (check functionality Detecion mode: Power Supply Volt- Upper Inverter of other units nearby N°411 Stops -External power supply fluctuation age <...
  • Page 89 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly The oven will not operate until re- Check phase & neutral (polarized flame detec- storing the burner functionality. Try tion on FCD)in swapped no flame detection to recover the functionality as fol- §HOW TO RECOGNIZE PHASE AND NEU- lows:...

  • Page 90: Power Board

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Possible Anomaly Description Instructions to User Action for Service anomaly causes Verify the water supply valve is The oven has detected a problem N°280 ISG is active but hu- fully open and the with the humidifier(ISG).
  • Page 91 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Type Anomaly Description Possible causes Instructions to User Action for Service anomaly Memorized Parameters memory corrupted; Try to N°121 Stops Issue with the SW or with Default all parameters / reload parameters switch oven Off/On...
  • Page 92 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 EH2O, LEVEL T,K, (TOUCH) – CLEANING ABORT This alarm, for the time being, can only be removed after running into the appliance a special “kill Clean” software. The software needs to be downloaded into a USB key, refer to the procedure shown in the next chapters. Once that the USB has been prepared correctly proceed as follow: The oven will upload;...
  • Page 93 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 It is preferable to have the following USB type : USB TYPE 2.0 8Gb or 16Gb FAT 32 FORMATTED. Once that the KILL_CLEAN has been unzipped into the root of your USB it should ap- pear like this AGELUX EH20 “KILL_CLEAN”...
  • Page 94 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 EH2O, LEVEL, B,C (DIGIT) – CLEANING ABORT Never start a cleaning cycle immediately after the switching ON of an oven, always wait at least 1 minute, after this time the oven is ready to start. Fail to do this will cause a false EH2O error with all SW versions (included 1.0.18) .
  • Page 95 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Switch OFF the oven and then ON ; the display will show again the error EH20 but, because the appliance is now in ”dEMo” mode, it will be able to carry out some special functions: Press sequentially the buttons on the keypad "1"...

  • Page 96: Electrical Wiring Diagram

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ELECTRICAL WIRING DIAGRAM All documentation for each PNC is available for authorized technicians on the web sites (PRIDE-SERVICE PORTAL- AGELUX etc..) and can be downloaded in file. For those that do not have access to the web sites, refer to your local country customer care.
  • Page 97 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 98 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 99 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...

  • Page 100: Electric Appliance

    ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 ELECTRIC APPLIANCE The following EWD is a generic 6/10gn Electric 380-415V scheme for illustrating purpose.
  • Page 101 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 102 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 103 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 104 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 105 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018...
  • Page 106 ELECTRONIC BOARDS SKYLINE – MAGISTAR OVEN 6-10-20GN 2018 Electrolux Professional SpA Sede legale Viale Treviso, 15 33170 Pordenone, ITALY Fax (+39) 0434 380 201 http://professional.electrolux.com...

This manual is also suitable for:

Magistar oven 6-10-20gn

Table of Contents