Hood Management; Cleaning Mode - Electrolux SkyLine PremiumS User Manual

PROGRAMS MODE
1. Select a cooking cycle in the Programs mode of the OVEN
(for example Red Meat);
2. Start the cycle;
3. The oven, connected with the blast chiller, proposes all the
cycles that contain at least one word present in the blast
chiller program's names;
Choose the required cycle and confirm the selection;
Red meat
1
SkyDuo
2
SkyDuo has found the following
100
paired cycles. Do you want to
proceed with the skyDuo process?
Red meat - chill
160°C
Red meat - freeze
00:30
01:30 h:m
4. In the BLAST CHILLER; it is possible to:
• Stop the process by touching the
• Confirm the synchronization.
• Postpone the process of synchronization by touching the icon
.
MANUAL USER
1
Chill
SkyDuo
Do you want to start the SkyDuo
0
process now? If the SkyDuo
°C
process starts, any other running
process will be stopped.
0°C Soft / Hard
01:30
:00
01:30 h:m
NOTE!
If a programme hasn't a graphic associated in one of
the appliances, it will be replaced by the icon
5. Some minutes before the OVEN cycle ending, in the
BLAST CHILLER precooling cycle starts to prepare its
cavity for the food just cooked.
If you had postponed the SkyDuo process, some minutes
before the end of the oven cooking cycle, a new pop-up
with the request of synchronization will appear.
F.15

HOOD MANAGEMENT

Once the hood is installed on the oven and enabled, the oven
display will show some pop-up windows to remind that the hood
maintenance is required after a period of working time.
This reminder can be skipped or, if the maintenance has been
done by the Service, confirmed.
20
%
°C
:00
.
MANUAL
1
SkyDuo Chill
+
Red Meat, red meat
0
°C
0°C Soft / Hard
01 00 :
Cooked red meat
:00
01:00 h:m
• To skip the pop-up window touch
The reminders appear only after 7 days of continuous operation.
• It is possible to check how much time is left until the hood
maintenance:
F.16

CLEANING MODE

"Cleaning" function allows to clean the oven cavity automatically
choosing the most suitable programme.
IMPORTANT
To prevent material damage, injury or fatal accidents
remove any object (trays, accessories,...), trolley
excluded, from the oven cavity before the washing
cycle.
1. Touch the cleaning icon and select the required cycle;
Manual Automatic
20
50%
Custom Cleaning
25
.
?
160°C
Help User
01 20 :
01:20 h:m
FORCED COOLING
• If the cavity temperature is too high, the oven asks for
proceeding to a forced cooling before starting any washing
cycle.
.
CLEANING
GreenSpirit
Programs
%
Soft
Medium
Settings
°C
Strong
Extra strong
Rinse
Agenda
Plan &
save
:00
Load solid chemicals
00:00 h:m
00:00 h:m
00:00 h:m
00:00 h:m
00:00 h:m
x3 x1
51