Skyduo/Match Mode (Depending On Your Model - Optional) - Electrolux SkyLine PremiumS User Manual

4. When the oven has optimized the sequence, press
button to start the execution;
PLAN & SAVE
New list
Preset / Program 1
00:00 h:m
Preset / Program 2
00:00 h:m
Preset / Program 3
00:00 h:m
Preset / Program 4
00:00 h:m
Preset / Program 5
00:00 h:m
Preset / Program 6
00:18 h:m
The oven starts the preheating. When the last cooking is
performed an estimation of consumption reduction is
displayed.
Saving a list
• Open the lower drawer;
• Select Save list;
• Type the new name;
Preset / Program
Preset / Program 6
Preset / Program 7
Preset / Program 8
Calculate
6:30
PM
If the name of the new list already exists, a popup window
appears to ask for overwriting or renaming it.
Modifying a list order
• Touch the three dots of the row correspondent to the cooking
to be moved;
• Touch to move the item;
A pop up message informs that this change cannot be saved.
PLAN & SAVE
New list
Preset / Program 1
00:00 h:m
Preset / Program 2
00:00 h:m
Preset / Program 3
00:00 h:m
Preset / Program 4
00:00 h:m
Preset / Program 5
00:00 h:m
Preset / Program 6
00:18 h:m
• All the remaining rows appear highlighted. Touch the row
position where you want to move the cooking.
• To recover the initial list open the lower drawer and touch
Restore list.
Deleting an item list
• Touch the three dots of the row correspondent to the cooking
to be deleted;
Cooking done!
Now holding!
-25%
00:00 h:m
00:00 h:m
00:00 h:m
00:00 h:m
Save list
100% 300°C 120°C
PLAN & SAVE
Plan & Save
The modification done are only
temporary and cannot be saved.
To come back to the initial list
open the drawer and press
"Restore list".
A pop up message informs that this change cannot be saved.
• Touch icon to delete the item;
PLAN & SAVE
New list
Preset / Program 1
00:00 h:m
Preset / Program 2
00:00 h:m
Preset / Program 3
00:00 h:m
Preset / Program 4
00:00 h:m
Preset / Program 5
00:00 h:m
Preset / Program 6
00:18 h:m
To recover the initial list open the lower drawer and touch
(Restore list).
• The list cannot be optimized again. Touch
the execution;
F.14 SKYDUO/MATCH MODE (depending on
your model - optional)
This option can be activated on demand. It works with a Wi-Fi or
Ethernet connection, installed by an authorized technician and
allows you to connect the oven and a blast chiller.
IMPORTANT
Make sure you have the SkyDuo/Match option
activated in both appliances. Only an authorized
technician can install and activate the SkyDuo/Match
option.
When the SkyDuo/Match icons
(see figure below), the connection works properly.
MANUAL USER
Accessories
Manual Automatic Prog rams
Base
Hood
SkyDuo
Usb probe
Cleaning Settings
Skyhub
MultiProbes
Smoker
Aromatizer
Transfer SkyDuo
Liquid cleaning
Enzymatic cleaning
To disable (or enable) SkyDuo/Match touch the green icon and
Water treatment
then touch the icon Grease collector /
Match status.
The synchronization process can start from any of the two
appliances (caller and recipient).
The search for a similar program between the two appliances
considers any program that contains at least one word present
in the caller program's name. The recipient proposes all the
cycles that meet these criteria.
It is possible to combine the SkyDuo/Match both in Automatic
and in Programs mode.
AUTOMATIC MODE
1. Select for example a cooking cycle in the Automatic mode of
the OVEN;
Plan & Save
The modification done are only
temporary and cannot be saved.
To come back to the initial list
open the drawer and press
"Restore list".
To optimize the new list return to
the previous page. do you
confirm the deletion of the
selected item?
button to start
are green in both appliances
MANUAL
Manual Automatic Programs
1
Chill
c
- 20
°
Hygiene Settings
Skyhub
?
Help Agenda USB
SkyDuo
Transfer
on the display to change SkyDuo/
USER
49