Electrolux SkyLine PremiumS User Manual page 34

Saving presets
• Once the cycle is set, it is possible to save it as a preset;
Open the lower drawer and select the related icon.
AUTOMATIC
Low temp.
Cooking
175
01:20 h:m
Save
preset
6:30
PM
Managing presets
• If you have already saved Low Temperature Cooking presets,
they show up as a list.
Touch three dots to change image, rename or delete the
presets (see the same procedure in the Image, name,
category link and deletion of stored programs paragraph in
F.8 PROGRAMS MODE chapter).
AUTOMATIC
Low temperature
cooking
Elux preset 1
Elux preset 2
Elux preset 3
User preset name 1
• Further actions can be done through the lower drawer.
See the available functions with presets through lower drawer
in the Customized presets management paragraph in this
chapter.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
F.7.3.2 Eco Delta Cooking
T
ECO DELTA COOKING
This special cycle adjusts the cavity temperature adjusts the
cavity temperature to maintain a constant difference (delta) with
the food core probe.
• Set the humidity value;
• Set the delta value for the cavity temperature;
• Then set the core probe temperature;
The display shows the set humidity value (A), for the cavity
temperature the delta value set (B) and for the probe the
current and the target values (C);
NOTE!
If creating more phases at least one of them must be
driven by probe with the cavity temperature set as a
delta from the food core temperature probe value.
Otherwise the START button is disabled and the
message "Eco delta cooking program invalid" pops
up.
34
°C
65
°C
120°C 20°C
AUTOMATIC
Low temperature
cooking
Abc
Elux preset 1
Elux preset 2
Elux preset 3
User preset name 1
User preset name 2
50%
20°C
70°C
• Touch button to start the cycle.
• Once the cavity temperature is reached, load the oven and
insert the food probe in the product.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
F.7.3.3 Regeneration
REGENERATION
This cycle is a set of categories and cooking cycles to reheat
chilled food keeping the humidity controlled. It works as a
standard automatic cycle.
To start a regenerating cycle, proceed as follows:
1. Access the cycle;
AUTOMATIC
Plate
Custom
Probe
Timer
2. Set the parameters defining the status of the food to
regenerate;
3. Touch button to start the cycle.
CAUTION
Cold food shall not to be added to the cavity
for regeneration while the Maintaining
(HOLD) phase is operating.
At the end of the cycle the display shows the consumptions (if
available) as a recap message.
F.7.3.4 Static Combi
STATIC COMBI
This cycle simulates static cooking using a more gentle air
distribution. The oven performs the cycle in manual mode
without the fan adjusting.
30
%
A
15
°C
B
51
°C
C
02:35 h:m
7
AUTOMATIC
Custom
Load
Standard Full
Humidity content
Dry Medium Moist
Cooking control
Probe Timer
23
°C
50°C