Feature Activation - Bosch VCU Manual

Bosch Motorsport

8.2 Feature activation

– Optional software feature packages are available for the Vehicle Control Unit VCU .
– All software feature packages can be purchased prior to delivery or after you have re-
ceived your device.
– If you have purchased an optional software feature package, it must be activated be-
fore it becomes operational.
– The feature activation status is stored permanently in the device and requires activat-
ing once only.
– As the activation key is device specific, a key delivered with one Vehicle Control Unit
VCU does not work on any other Vehicle Control Unit VCU .
– When purchasing a software feature package, you have to tell Bosch the ECU ID code.
The ECU ID code is device specific and can be found in the 'features info' window,
shown in the screenshots below.
– If you have not purchased an optional software feature package, the next steps can
be skipped.
1. Ensure a connection to the device.
2. To activate a feature, proceed as follows: For the Vehicle Control Unit VCU, upgrades
are available for the logger part as well as for the ECU part. Depending on which up-
grade (logger or ECU) you want to activate, double-click on " Vehicle Control Unit
VCU-Logger" or " Vehicle Control Unit VCU-ECU".
3. Click on the 'Features info' tab in the Main Area.
1st: Double-click
on DDU
2nd: Click on
'Features info'
The 'Vehicle Control Unit VCU features info' window appears.
Vehicle_Control_Unit_VCU_Manual
Starting Up | 8
23 / 136