Table of Contents
Advertisement
Figure 119. Installing the Riser 4 blank
Installing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air shroud
4. If removed,
install the expansion cards into the expansion card
NOTE:
Install Riser 2 before installing Riser 1 and Riser 3. Install Riser 4 after installing Riser 3.
CAUTION:
Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
Steps
1. If installed, remove the riser blanks and if required loosen the captive screws.
NOTE:
Store the riser blanks for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system.
Safety
instructions.
Before working inside your
or
remove the GPU air
shroud.
system.
risers.
Installing and removing system components
137
Advertisement
Table of Contents
