Table of Contents
Advertisement
Table 56. Configuration 11: R1 paddle+R2A+R3B+R4 paddle (continued)
Card type
Broadcom (NIC: 25Gb)
Broadcom (NIC: 10Gb)
Broadcom (NIC: 10Gb)
Broadcom (NIC: 10Gb)
Broadcom (NIC: 10Gb)
Broadcom (NIC: 10Gb)
Intel (NIC: 10Gb)
Intel (NIC: 10Gb)
Intel (NIC: 10Gb)
Intel (NIC: 10Gb)
Intel (NIC: 1Gb)
Intel (NIC: 1Gb)
Intel (NIC: 1Gb)
Intel (NIC: 1Gb)
Broadcom (NIC: 1Gb)
Broadcom (NIC: 1Gb)
Foxconn (External Adapter)
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air shroud
4.
NOTE:
If BOSS-N1 module is installed, be sure to disconnect the BOSS-N1 power cable and Signal cable before
removing the Riser 1 cage.
5. If applicable, disconnect the cables from the expansion card or system board.
132
Installing and removing system components
Slot priority
6, 3
5, 4
6, 3
5, 4, 6, 3
5, 4
6, 3
5, 4
6, 3
5, 4
6, 3
5, 4
6, 3
5, 4
6, 3
5, 4
6, 3
5, 4, 6, 3
Safety
instructions.
Before working inside your
or
remove the GPU air
shroud.
Maximum number of cards
2
2
2
4
2
2
2
2
2
2
2
2
2
2
2
2
4
system.
Advertisement
Table of Contents
