Table of Contents
Advertisement
Figure 93. Applying thermal grease
7. For new DLC module, pull and remove the plastic cover from the base of DLC module.
Figure 94. Removing the cover
8. Place the DLC module on the processor and press the base of the DLC module until the retaining clip locks onto the DLC
module at all the four corners.
NOTE:
● Ensure latching features on retaining clip, and DLC module are aligned during assembly.
● Ensure that the pin 1 indicator on the DLC module is aligned with the pin 1 indicator on the retaining clip before
placing the DLC module onto the retaining clip.
Installing and removing system components
113
Advertisement
Table of Contents
