Figure 134. Installing the Riser 1 blank
Figure 135. Installing the Riser 4 blank
Installing the full length expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installing full length expansion card riser for the first time,
4.
Remove the GPU air shroud top
5. If installed,
remove the GPU air shroud
6. If removed,
install the GPU into the expansion card
Safety
instructions.
Before working inside your
cover.
filler.
risers.
system.
remove the air shroud
Installing and removing system components
and replace it with the
GPU air
shroud.
147