Installation
2.7.7.3 ANN-I/O Connection to FACP
The ANN-I/O connects to the FACP via the ANN-BUS as illustrated in Figure 2.20. After the
ANN-I/O is connected to the panel, it must be added to the system via FACP programming.
TB3
40
FACP
Figure 2.20 ANN-I/O Connection to FACP
ANN-I/O Module
ANN-BUS and power wiring are
supervised and power-limited
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
ANN-BUS Devices