3 Installation and electrical connection
Follow the specified sequence during installation and start-up of
the SRC-10.
1.
Install the SCN-10 completely.
2.
Install the SRC-10.
3.1 Prerequisites and requirements
The SCN-10 requires an Ethernet network (LAN/WLAN)
including router.
In order to use the SRC-10, you will need a smart phone or tablet
(iOS versions which are under support of Apple, or Android 4.x or
higher from 8" with a 3G/4G mobile communications system (UMTS,
LTE)) as well as an on-site WLAN.
For start-up, you will need a standard laptop and the SCI-10 installation
kit, consisting of the USB-LAN adapter and a network cable.
MU1H-0635GE51 R1016
10