Table of Contents
Advertisement
FACP Configuration Templates
APPENDIX B
The MRP-2002/E has been provided with preprogrammed templates which allows the user to
quickly configure the FACP [refer to "FACP CONFIG (Application Templates)" on page 50]. The
user also has the option to reprogram selected portions of each template for customized
applications. The following pages of this appendix describe the programming for the templates.
Note: MRP-2002/E Agent Release Control Panel can be configured using preprogrammed
Templates 1 and 2.
Important! The Templates have been programmed with specific Input Zone Types and Output
Circuit Types. If the FACP is configured with the preprogrammed Templates, the user must ensure
that the devices connected to each Input Zone and Output Circuit are compatible with the
programmed types. (The user can reprogram the circuit types if desired).
108
Input-to-Output Circuit Mapping and Cross-Zone Operation
FACP Configuration Templates
MRP-2002 & MRP-2002E PN 53049:A1 5/01/2008
Advertisement
Table of Contents
