Figure 34: Open New Project - Omron Techman Robot Series User Manual

Collaborative robot: conveyor tracking

Table of Contents

Create a new Conveyor Tracking project

Insert the TM Dongle into the control box before activating TMflow.

Start a new project by clicking New > New Flow from the Project page in TMflow

Check the Conveyor Tracking box

Select the conveyor

Choose Conveyor_0 if 1 conveyor is used



Choose Conveyor_1 if 2 conveyors are used



Select ETH Mode

Enter project name and click Open.

Omron TM Collaborative Robot: Conveyor Tracking User's Manual

Figure 33: Save calibration result

Figure 34: Open new project

Table of Contents

Do you have a question about the Techman Robot Series and is the answer not in the manual?

Tm series