Advertisement
4. Starting Web Management
The following shows how to start up the Web Management of the ICA-x80
series. Note the ICA-x80 series is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet
address.
User PC
(192.168.0.X)
1. The ICA-x80 series supports IEEE 802.3af/at standard; be
reminded to power either from AC to DC adapter or 802.3af/
at PoE switch.
2. The AC to DC adapter is not included in the package.
For example, the ICA-x80 series default network type is DHCP Client; to
search the current IP address of the ICA-x80 series, follow the procedure
below:
1. Download the "PLANET Search Tools" utility from the following PLANET
website link: http://www.planet.com.tw/en/support/downloads?method=key
word&keyword=PLANET+Search+Tools&view=6#list
2. Install the "PLANET Search Tools" utility.
3. After the camera utility is launched, all cameras found in your local area
network will be displayed.
4. The existing ICA-x80 series in the local network.
5. Search the ICA-x80 series in the network.
6. Modify the IP parameters of the selected ICA-x80 series.
7. Select the ICA-x80 series you want to configure and double-click on it.
8. You will be connected to the ICA-x80 series via web browser automatically.
6
PoE Ethernet Switch
Figure 4-1: IP Management Diagram
IP camera
Advertisement
