Xylem SI Analytics HandyLab 200 Operating Manual page 33

HandyLab 200
If the memory is full
Editing the data memory
ba77063e03 01/2018
Manual data storage 4 von 500
15.03.2014 07:00:00
ϰ 1415 µS/cm
24.8 °C AR +++
ID number:
Continue
15.03.2014
Back
10:00
2 If necessary, change and confirm the ID number (1 ... 10000)
with <><> and <ENTER>.
The dataset is stored. The meter switches to the measured
value display.
The following window appears if all 500 storage locations are occupied:
Warning
Data storage full. Erase?
Yes
No
15.03.2014
Back
10:00
You have the following options:
 To erase the entire memory, confirm Yes.
 To cancel the storing process and switch to the measured value dis-
play, confirm No.
4.5.2 Displaying and editing the measurement data memory
The contents of the manual measurement data memory can be shown
on the display.
The measurement data memory has a function to erase the entire con-
tents.
The memory is edited in the menu, Storage & config/ Data storage. To
open the Storage & config menu, press the <F1
1
_
Operation
>/[Menu] key in the
33