Xylem SI Analytics HandyLab 200 Operating Manual page 21

HandyLab 200
ba77063e03 01/2018
1 In the measured value display:
_
Using <F1 >/[Menu], open the Storage & config menu.
The instrument is in the setting mode.
2 Select and confirm the System / Clock menu with <><>
and <ENTER>.
The setting menu for the date and time opens up.
3 Select and confirm the Time menu with <><> and
<ENTER>.
The hours are highlighted.
Clock
:
Date format
:
Date
:
Time
15.03.2014
Back
10:00
4 Change and confirm the setting with <><> and <ENTER>.
The minutes are highlighted.
5 Change and confirm the setting with <><> and <ENTER>.
The seconds are highlighted.
6 Change and confirm the setting with <><> and <ENTER>.
The time is set.
7 If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8 To make further settings, switch to the next higher menu level
with [Back]<F1>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring mode.
dd.mm.yyyy
15.03.2014
14:53:40
Operation
21