Printer Specifications - Sharp MX-C402SC Operation Manual

PRINTER SPECIFICATIONS

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 When the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 When the XPS expansion kit is installed.
*4 Required when there is insufficient memory to handle certain print data. Must be used when the XPS expansion kit
is installed.
Built-in
40 pages/min (When printing same document continuously on 8-1/2"x11" (A4) plain paper in
non-offset mode, excluding processing time.)
600x600 dpi / 1200x1200 dpi
PCL5c, PCL6, PostScript 3 compatible*1, XPS*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*1
See "VERIFYING SYSTEM REQUIREMENTS" in the Start Guide.
PCL5c, PCL6
1
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Standard system memory: 1GB
4
Expansion memory: 1GB*
Entire page excluding margin of 1/6" (4.2mm) at each edge. The actual print area may vary
depending on the printer driver and the software application.
3-75
3
80 European fonts, 28 barcode fonts*
136 European fonts
PRINTER
2
, 1 bitmap font
Contents