Storing Frequently Used Original Sizes - Sharp MX-C402SC Operation Manual

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and
delete special original sizes.
Storing original sizes (editing/clearing)
Up to 12 special original sizes can be stored.
Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Original
Original Exit
Upper Exit
Place
5½x8½ 8½x14
1
8½x11 8½x13
8½x13
Size Input
Original
Custom Size
X15½ Y 8½
Recall
2
If you wish to edit or clear a previously stored key...
Touch the key that you want to edit or clear. The following screen will appear.
• To edit the key, touch the [Modify] key and go to the next step.
• To clear the key, touch the [Delete] key. Make sure that the original size has been cleared and touch the [OK] key.
OK
Heavy Exit
AB
2 Check Size
5
Inch
Card Size
Custom Size None
OK
OK
Store/Delete
(2) (1)
A custom size has already been stored
in this location.
Touch the [Custom Size] key.
Store the original size.
(1) Touch the [Store/Delete] tab.
(2) Touch a key for storing a custom original
size.
Touch a key that does not show a size (
Cancel Delete Modify
2-32
COPIER
).
Contents