Sharp MX-C402SC Operation Manual page 197

Paper Select
Paper Tray
7 1. 8½x11
2. 5½x8½
3. 8½x14
4. 8½x11
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the originals were placed in the document feeder tray, the originals are copied.
• If you placed the originals on the document glass, scan each page one page at a time.
When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
8
press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
first original. )
To cancel scanning of the original and copying...
Press the [STOP] key (
Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Bypass Tray Type/Size Setting
Size Input
X14 Y8½
X
X14 Y8½
Y
X14 Y8½
Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system
settings. For details, see
to enter appears, touch that key.
(1) (2)
OK
Bypass Tray
8½x11
Plain
Plain
Plain
Plain
Plain
).
OK
OK
14
(5 1/2~14)
AB
inch
8 ½
Inch
(5 1/2~8 1/2)
inch
"Paper Tray Settings" (page 7-14) in "7. SYSTEM SETTINGS". If the key for the size that you wish
Select the bypass tray.
(1) Touch the paper size key of the bypass tray.
(2) Touch the [OK] key.
Touch the [X] key and enter the horizontal dimension of
the paper with the
key and enter the vertical dimension. When finished,
touch the [OK] key.
2-40
COPIER
keys, and then touch the [Y]
Contents