Scanning Both Sides Of A Card Ontoa Single Page (Card Shot) - Sharp MX-C402SC Operation Manual

SCANNING BOTH SIDES OF A CARD ONTO
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.
Originals
Front
Back
• Depending on the card type, some cards cannot be used with the automatic document feeder.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
A
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
3
(2) Touch the [Special Modes] key.
(3) Touch the [Card Shot] key.
☞
SPECIAL MODES
Transmission
(page 5-18)
(page 5-70)
Scanned image
Place the original face up in the
document feeder tray, or face down on
the document glass.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (page 5-54)
5-78
SCANNER/INTERNET FAX
Contents