G Misfeed In The Finisher; Misfeed In The Finisher - Sharp AR-M451N Operation Manual

FINISHER

Misfeed in the finisher

When a misfeed occurs in the finisher, remove the misfed paper following the procedure below.
1 Remove the misfed paper from the output
area.
2 Open the finisher top cover.
Top cover
3 Remove the misfed paper.
4 Open the finisher compiler.
3-12
Be careful not to tear the
misfed paper during
removal.
Move the tab in the
direction of the arrow as
shown in the illustration
to open the top cover.
Be careful not to tear the
misfed paper during
removal.
After removing the
paper, press down on
the top cover to close it.
Release the latch to
open the finisher
compiler.
5 Raise the paper guide and remove the
misfed paper.
Paper
guide
6 Close the finisher compiler.
Be careful not to tear the
misfed paper during
removal.