Stapling Printed Pages (When A Finisher Is Installed) - Sharp MX-M260 Online Manual

1 PRINT

Stapling printed pages (when a finisher is installed)

When a finisher is installed, printed pages can be stapled.
To use this feature, open the printer driver setup screen and select it in the "Finishing"
field of the "Main" tab.
☞
See Basic printing for details on how to open the printer driver.
●
The maximum number of sheets that can be stapled is 50. (up to 30 sheets when the paper size is B4, Foolscap, or larger).
Note
● Paper sizes that can be used for staple printing are Ledger, Letter, Letter-R, Legal, A3, A4, A4R, B4, B5, B5R, and Foolscap.
● Paper types that can be used for staple printing are Plain, Letter Head, Recycled, Color, Thin and Heavy (only front cover and
back cover).
●
Staple printing is not possible when the ROPM function is disabled. (See "CONFIGURING THE PRINTER DRIVER" in the software setup guide.)
●
If the finisher is disabled in the system settings (administrator), the staple function cannot be used. (See "DISABLING OF
STAPLER" in the "SYSTEM SETTINGS (ADMINISTRATOR)" in the operation manual.)
● Stapling is not possible if disabled in the system settings (administrator) (see "DISABLING OF STAPLER" in the "SYSTEM
SETTINGS (ADMINISTRATOR)" in the operation manual).
When a finisher is installed
The following example shows how portrait oriented pages are stapled together.
If paper is oriented horizontally (Letter-R, A4R, A3, etc), the pages are stapled in the upper right-hand corner.
Note
CO NT E N TS
Print data
The pages are
stapled in the
upper left-hand
corner.
Printing result
20