Setting The Diskette Drive(S); Setting The Hard Disk Drive - Epson Equity LT-386SX User Manual

Setting the Diskette Drive(s)

The possible selections for drives A and B are:
1.44MB 3 l/z"
1.2MB 5
Unless you have changed the setting for DIP switch 1, designate
drive A as the internal 1.44MB, 3 '/z-inch diskette drive. If you
have installed an external 1.2MB 5 '/+inch drive, choose that as
the setting for drive B.
If you have set DIP switch 1 to off to reverse the designations of
the A and B drives, set drive B to 1.44MB 3 l/z", and if you have
attached an external diskette drive, set drive A to 1.2MB 5 1/4".
See Appendix A for more information on the DIP switches.

Setting the Hard Disk Drive

You may have either of two types of hard disk drives installed in
the Equity LT-386SX. Type 2 is the 20MB hard disk drive.
Type 17 is the 40MB hard disk drive. Define
appropriately as either type 2 or type 17.
Select Not installed for Hard disk D.
Setting Up Your System
Hard disk C
1-21