Epson Equity LT-386SX User Manual page 146

The Run Time Parameters window lets you specify how long
you want the test to run, whether you want the program to
notify you of each error as it occurs, and whether to create a log
of all errors that occur during testing.
The Help window shows the keys you use to make menu
selections.
A short message describing each test you highlight appears at
the bottom of the screen.
You use these keys to make menu selections and run diagnostics
tests:
Enter
F2
F3
F4
F5
F6
Move to the next window (or device)
Move to the previous window (or device)
Move to the next test
Move to the previous test
Start the test
Set the Run Time Parameters
Select or deselect a test
Select all tests
Deselect all tests
Run all selected tests
System Diagnostics D-5