Epson Equity LT-386SX User Manual page 126

5. Connect the appropriate end of the monitor cable to the
port marked
computer, as shown below.
6. If the connector has retaining screws, tighten them with a
screwdriver.
7. If necessary, plug the monitor's power cable into the power
inlet on the monitor. (Some monitors come with
permanently attached power cables.) Then plug the power
cable into an electrical outlet.
When you are ready to use the computer, turn on the monitor
and any other peripheral devices, then turn on the computer.
Text displays on the external monitor screen instead of the
computer's LCD screen.
B-2
Installing Options
VIDEO on the right side of the
RGB
RGB VIDEO port