Epson Equity LT-386SX User Manual page 121

ON'
OFF
5 ON*
OFF
6 ON*
OFF
O N
OFF*
ON'
*Default setting
1
Switch allows you to exchange the definitions for diskette
drives A and B. When switch 1 is ON (the factory setting)
drive A is the internal 3 '/z-inch diskette drive and drive B is an
optional external 5 '/+inch diskette drive. By turning switch 1
OFF, you define the internal diskette drive as B and the
optional external drive as A.
Switch 2 defines the primary display. The LT-386SX recognizes
the LCD as the primary display, unless it detects that an
external monitor has been connected to the
If an external monitor is connected, it becomes the primary
display. When switch 2 is ON (the factory setting) the primary
display is defined as a color display. The LCD translates colors
into 16 shades of gray. When switch 2 is OFF, the primary
display is monochrome.
Enables the serial port.
Disables the serial port.
Selects parallel port 1 (LPT1, I/O addresses 378H
through 37FH) as the parallel port.
Selects parallel port 2 (LPT2, I/O addresses 278H
through 27FH) as the parallel port.
Enables the parallel port.
Disables the parallel port.
Defines the internal diskette drive as drive B.
(When this switch is ON, the internal drive is defined
as both A and B, and an optional external drive is
effectively disabled.)
Defines the external diskette drive
Must be ON.
as
drive B.
RGB VIDEO
DIP Switches A-5
to
port.