in which you're using your computer
These instructions ensure that your system starts up properly
each time you boot it from the hard disk. See your MS-DOS
Installation Guide for details.
You may also want to add the HDDPSAVE utility to your
AUTOEXEC.BAT file. By adding this utility, you can set the
power-off period for the hard disk each time you power on the
computer.
To modify the AUTOEXEC.BAT file created by SELECT,
follow these steps:
1. At the MS-DOS command prompt in the root directory
: \ >), type the following and press Enter:
(C
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
2. Type
HDDPSAVE /5
power to the hard disk if you do not access the hard disk
for five minutes. Use any time period you want (between
1 and 18).
3. Press F6 and then Enter.
and press Enter. This turns off
Using the Equity LT-386SX
2-27