Appendix E Using - Epson Equity LT-386SX User Manual

Appendix E
Using OS/2
If you have purchased OS/2 (version 1.1) for your Equity
LT-386SX, you need to install the LCD video driver Epson has
provided on your Reference diskette to run OS/2 on the LCD
display. The steps below describe how to install this file.
1. Follow the instructions in your MS-DOS 4.01 Installation
Guide to install MS-DOS on your hard disk.
2. Make a duplicate of the OS/2 Installation diskette on a
blank 1.44MB diskette using the DISKCOPY command.
You can do this using the Epson MENU utility or the
MS-DOS Shell, or you can type the following at the
C : \DOS> prompt and press Enter:
DISKCOPY A: A:
(The DISKCOPY command is described in detail in your
MS-DOS Reference Manual.)
3. Remove the diskette in drive A and insert your Reference
diskette. To copy the BVSCALLS.DLL file from the
Reference diskette to the hard disk, type the following and
press Enter:
COPY
4. Remove your Reference diskette and insert the copy you
made of the OS/2 Installation diskette.
A:BVSCALLS.DLL C:
Using OS/2 E-1