Executing Diagnostics Tests In Batch Mode; Running The Tests - Epson Equity LT-386SX User Manual

Executing Diagnostics Tests in Batch Mode

To execute the selected group of diagnostics tests in batch
mode, simply press F6. The diagnostics program highlights each
test name as it runs the test.
If you selected Passbound testing, the program displays the pass
number on the right side of the screen above the Run Time
Parameters window. For example:
P a s s :
When the program is executing a group of tests, you can stop
the testing and return to the System Board submenu of tests by
pressing Ctrl Break. The program completes the current test
before it stops.
If you specified Wait on error in the Run Time
Parameters, the program pauses each time an error occurs.
When you press Enter, the program continues the diagnostics
testing.

Running the Tests

When a test completes, you see this prompt:
Press
Press Enter to return to the main menu.
If an error occurs during a test, note the error message and
contact your Epson dealer. Your dealer may be able to solve the
problem; if not, he or she can refer you to an authorized Epson
Customer Care Center. If necessary, call the Epson Consumer
Information number (1-800-922-8911) for the location of your
nearest authorized Epson Customer Care Center.
D-12
System Diagnostics
0 0 0 0 1
<ENTER> to return to MAIN MENU.