Using Scroll - Epson Equity LT-386SX User Manual

Using SCROLL

The SCROLL utility improves the LCD display for running
certain graphics scrolling programs. When you are running your
application program, if you notice that the top half of the screen
scrolls but the bottom half does not, you can use this utility.
Follow these steps to use SCROLL:
1. Insert your Reference diskette into the
2. Type
3. Type
message:
Extended panel support enabled.
The SCROLL utility remains active in memory until you reset
or turn off the Equity LT-386SX.
If you frequently need to use SCROLL, you may want to add
this utility to your AUTOEXEC.BAT file. Once placed in the
AUTOEXEC.BAT file, the utility becomes active
you turn on or reset the computer. (See Chapter 3 for a
complete description of the AUTOEXEC.BAT file and how it
functions.)
To modify the AUTOEXEC.BAT file, follow these steps:
1. At the MS-DOS command prompt in the root directory
(C
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
2. Type
3. Press F6 and then Enter.
: and press Enter to log onto drive A.
A
and press Enter. You see the following
SCROLL
: \ >), type the following and press Enter:
and press Enter.
SCROLL
Using Other Reference Diskette Utilities
diskette drive.
every time
F-5