Copying With One Diskette Drive - Epson Y16499100301 User Manual

3.
Type:
DISKCOPY A: B:
and press
Enter.
Insert
SOURCE
Insert
TARGET
Press any key when ready . . .
4. Drive A already contains the diskette you want to copy
(the source) and drive B contains the blank diskette (the
target), so just press any key. If the diskette in drive B is
not formatted, the DISKCOPY program formats it. Then
the program begins copying the data from drive A to the
formatted diskette in drive B.
5. When the copy is complete, the screen displays this
prompt:
another diskette (Y/N)?
Copy
Press Y so you can make a copy of the reference diskette.
Remove the diskettes from drives A and B (press the release
button on each drive to remove the diskette). Then insert
the reference diskette in drive A and another blank diskette
in drive B. Follow the prompts on the screen to copy the
reference diskette.
6. When you finish and the Copy
prompt displays, press
prompt.

Copying with one diskette drive

1. If it is not already in the drive, insert your MS-DOS system
diskette in drive A (and press any key, if necessary). The
A> prompt should be on the screen.
2.
Type:
DISKCOPY
and press
Enter.
1-20
The screen displays these prompts:
diskette in drive A:
diskette in drive B:
another diskette (Y/N)?
to return to the MS-DOS A>
N
The screen displays the following prompts:
Setting Up Your System