The Lcd Screen Is Blank - Epson Equity LT-386SX User Manual

2. If the status indicator bar still does not come on, turn off
the power switch. Check that the AC adapter is securely
connected to both the computer (or the battery pack) and
an electrical outlet. Make sure the green LED on the AC
adapter is illuminated. Then turn the power back on.
3. If the computer still does not start, check the electrical
outlet. Plug a lamp into the outlet and turn it on to see if
the outlet supplies power.
4. If your computer still won't start, contact your Epson dealer.

The LCD Screen Is Blank

If the computer starts but no image appears on the LCD screen,
follow these steps to solve the problem:
1. Use the contrast and brightness levers to adjust the screen
display.
2. To save power, you may have set a time period for standby
mode in the SETUP menu, so that the computer turns off
the LCD screen automatically after a specified period of
time with no key input. If this happens, press any key to
restore the display.
To turn off the standby mode feature, hold down Ctrl and
press left Shift and L simultaneously. The computer beeps
once to inform you that standby mode is disabled. If you
want to change the time limit for standby mode or to turn
the feature off in SETUP, reset the computer, run SETUP
again, and set standby mode to 00 in the SETUP menu.
Troubleshooting
4-2