Setting The Scratch Ram Option; Setting The Cpu Clock Setting; Setting The Shadow Ram - Epson Equity LT-386SX User Manual

Setting the Scratch RAM Option

Scratch RAM is an area of memory that OS/2 and some
application programs use. The Equity LT-386SX lets you pick
what area of memory you want to use for scratch RAM. If you
are not using OS/2, VDISK, or a user-defined drive type,
choosing BIOS stack area 30:00 provides a little bit more
memory for your MS-DOS programs. (See Appendix D in this
manual for further information on user-defied drive types.)
For best results when using OS/2, a user-defined disk drive type,
or a RAM disk program, choose the top of base memory as the
scratch RAM location.

Setting the CPU Clock Setting

This setting determines the execution speed the Equity
LT-386SX uses every time you turn on the computer. During
operation, you can change the speed by holding down the Ctrl
key and then pressing the left Shift and F keys simultaneously.
The CM-left Shift-F "hot key" combination does not change
the setting the computer uses when you turn it on or reset it.

Setting the Shadow RAM

Enabling shadow RAM causes the Equity LT-386SX to copy the
contents of BIOS into RAM. This speeds up processing
operations, because the computer can read RAM much faster
than ROM. (Enabling shadow RAM does not reduce the
amount of memory you can define as expanded memory.)
Setting Up Your System
1-23