Epson Equity LT-386SX User Manual page 163

Disk drive type
The program displays the following prompt for the disk drive
type:
Disk Drive type
Select drive type 2 for a 20MB drive or drive type 17 for a
40MB drive. The program determines the type of hard disk
drive based on the settings in CMOS RAM.
A pop-up window on the screen lists 47 possible drive types.
This allows for the possibility of additional hard disk drives in
the future. If you select the User Defied hard disk drive, you
must provide the following information:
Number of cylinders
Number of heads
Number of sectors per track
Write precom
Write precom cylinder number
Landing zone
Interleave factor
The program displays the following prompt for the interleave
factor:
Interleave
The interleave factor affects the performance of your hard disk.
The default value is 3. When you execute the Auto Interleave
test, the diagnostics program determines the best interleave
value for your hard disk and formats the hard disk for this
interleave factor.
If you enter an interleave value in response to the Interleave
prompt, you override the value set by the program. Only do this
if the documentation with your hard disk recommends a
different value.
System Diagnostics
D-22
? 2
(1-16) ?