Connecting an External Diskette Drive
Follow these steps to connect the optional, 1.2MB, 5 '/+-inch
diskette drive to your LT-386SX:
1.
Make sure both the computer and external diskette drive
(as well as any other peripheral devices) are turned off.
2.
Verify that DIP switch 7 is OFF (the factory setting).
3.
Place the external diskette drive near the Equity LT-386SX.
4.
Lower the interface cover on the front, right side of the
computer (when the front of the computer is facing you).
5.
Connect the interface cable from the external diskette drive
to the
shown below.
port on the right side of the computer, as
EXT.FDD
Installing Options
B-3