Starting The Diagnostics Program; Creating A Database - Epson Equity LT-386SX User Manual

Starting the Diagnostics Program

To start the diagnostics program, follow these steps:
1. Insert the Reference diskette in drive A.
2.
Turn on or reset the computer.
3.
At the MS-DOS prompt, type the following and press
Enter:
DIAGUS
The diagnostics program displays a title screen.
4. Press any key to continue.

Creating a Database

You can create a database to record the location of faulty
memory chips that are causing memory errors. To graphically
represent the memory board on the screen, you need to identify
your system's memory configuration.
In the lower portion of the screen, you see this message:
Press
Press
E
SC
diagnostics program main menu appears so you can select the
tests you want to run.
D-2 System Diagnostics
<Esc>
if you do not want to create the database. The
bypass database creation
to