The Lcd Screen Is Blank; The External Monitor Screen Is Blank - Epson ActionNote 4SLC/25 User Manual

The LCD Screen Is Blank

If the computer starts up but no image appears on the LCD
screen, follow these steps to solve the problem:
1. Use the brightness and contrast controls to adjust the screen
display.
To save power, you may have set a timeout period for the
2.
LCD screen in the Setup program. This turns off the screen
automatically after a specified period of time has elapsed
with no keyboard input. Press any key to see if this restores
the display. (See Chapter 5 for information about the power
management options.)
3. Make sure the suspend/resume switch is set to the left. The
computer may just be in Suspend mode.
4. If you have connected an external monitor to your computer
and you are using it, you should not have any problem
displaying information on both screens at the same time.
Check your VGACONF settings; see Chapter 7 for details.

The External Monitor Screen is Blank

If you are using an external monitor and no image appears on
its screen, follow these steps to solve the problem:
1. Make sure the power switches on the computer and the
monitor are turned on.
2. Adjust the brightness and contrast of the monitor screen.
3. If your LCD screen is displaying information, you may
have disabled the external monitor. Check your VGACONF
settings; see Chapter 7 for details.
A-6 Troubleshooting