To log in as a Super User:
A user with super user permissions can use the Check Point Appliance shell to do system-level
operations, including working with the file system.
1. Connect to the Check Point Appliance platform using an SSH client or serial console client.
2. Log in to the clish shell using your user name and password.
3. Run Expert
4. Enter the expert password.
Configuring Administrator Access
The Device > Administrator Access page lets you configure the IP addresses and interface
sources that administrators can use to access the Check Point Appliance. You can also configure
the Web and SSH ports.
Note - 1100 appliances support only IPv4 addresses. 1200R and 1400 appliances support both IPv4
and IPv6 addresses.
First set the interface sources from which allowed IP addresses can access the appliance.
To set the interface sources from which administrator access is allowed:
Select one or more of the options:
•
LAN - All internal physical ports
•
Trusted wireless - Wireless networks that are allowed access to the LAN by default (only
in Wireless Network models.)
•
VPN - Uses encrypted traffic through VPN tunnels from a remote site or uses a remote
access client
•
Internet - Clear traffic from the Internet (not recommended to allow access from all IP
addresses)
To allow administrator access from any IP address:
1. Select the Any IP address option. This option is less secure and not recommended. We
recommend you allow access from the Internet to specific IP addresses only.
2. Change the WEB Port (HTTPS) and/or SSH port if necessary.
3. Click Apply. An administrator can access the Check Point Appliance using any IP address
through the allowed interface sources.
To allow administrator access from specified IP addresses:
1. Select the Specified IP addresses only option.
2. Click New.
The IP Address Configuration page shows.
3. Select Type:
•
IPv4 address
•
IPv4 network
•
IPv6 address (1200R and 1400 appliances only)
•
IPv6 network (1200R and 1400 appliances only)
4. Enter the IP address or click Get IP from My Computer.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.70
Appliance Configuration
|
85