To make sure you have the latest firmware version:
Click Check now.
To automatically upgrade your appliance firmware when Cloud Services is not
configured:
1. Click Configure automatic upgrades.
The Automatic Firmware Upgrades window opens.
2. Click Perform firmware upgrades automatically.
3. Select the upgrade option to use when new firmware is detected:
Upgrade immediately
•
Or
•
Upgrade according to this frequency.
4. If you selected Upgrade according to this frequency, select one of the Occurs options:
Daily - Select the Time of day.
•
•
Weekly - Select the Day of week and Time of day.
•
Monthly - Select the Day of month and Time of day.
5. Click Apply.
Notes:
•
When a new firmware upgrade is available, a note shows the version number. Click Upgrade
Now to upgrade it immediately, or click More Information to see what is new in the firmware
version.
•
If the gateway is configured by Cloud Services, automatic firmware upgrades are locked. They
can only be set by Cloud Services.
To manually upgrade your appliance firmware:
1. Click Manual Upgrade.
The Upgrade Software Wizard opens.
2. Follow the Wizard instructions.
Note - The firewall remains active while the upgrade is in process. Traffic disruption can only
be caused by:
•
Saving a local image before the upgrade (this causes the Firewall daemon to shut down).
This may lead to disruption in VPN connections.
•
The upgrade process automatically reboots the appliance.
To revert to an earlier firmware image:
1. Click Revert to Previous Image.
2. Click OK in the confirmation message.
The appliance reboots to complete the operation.
To backup appliance settings:
1. Click Backup.
The Backup Settings page opens.
2. To encrypt the backup file, select the Use File Encryption checkbox. Set and confirm a
password.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.70
Appliance Configuration
|
78
Need help?
Do you have a question about the CHECK POINT 1100 and is the answer not in the manual?