Infinity CHECK POINT 1100 Administration Manual page 80

Upgrade Settings
The system always performs an upgrade on a separate flash partition and your current-running
partition is not affected. You can always switch back to the current image if there is an immediate
failure in the upgrade process. If the appliance does not come up properly from the boot,
disconnect the power cable and reconnect it. The appliance automatically reverts to the previous
image.
Click the Revert to Previous Image button on the System Operations page to return to an earlier
image. The backup contains the entire image, including the firmware, all system settings and the
current security policy.
When you click Next, the upgrade process starts.
Upgrading
The Upgrading page shows an upgrade progress indicator and checks off each step as it is
completed.
•
Initializing upgrade process
•
Installing new image
Backing up the System
In the Device > System Operations page you can backup and restore system settings.
To create a backup file:
1. Click Create Backup File.
The Backup Settings window opens.
2. To encrypt the file, click Use file encryption.
If you select this option, you must enter and confirm a password.
3. Optional - add a comment about the backup file.
4. Click Create Backup.
System settings are backed up.
The backup file includes all your system settings such as network settings and DNS configuration.
The backup file also contains the Secure Internal Communication certificate and your license.
replace
If you want to
previous appliance and re-activate your license (through License Page > Activate License).
duplicate
If you want to
on the new one. Make sure to change the IP address of the duplicated appliance (Device > Internet
page) and generate a new license.
To configure a periodic backup to the FTP server:
1. Go to Device > System Operations > Backup and Restore System Settings.
2. Click Settings.
The Periodic Backup Settings window opens.
3. Click Enable scheduled backups.
4. Configure the file storage destination (see below).
5. Optional - Select Use file encryption.
If you select this option, you must enter and confirm a password.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.70
an existing appliance with another one, you can restore the settings of your
an existing appliance, you can restore the settings of the original appliance
Appliance Configuration
| 80