Infinity CHECK POINT 1100 Administration Manual page 26

The window has two sections. The top section shows a list of gateways and status details
regarding the installed policy. You can use the filter fields to see only policies of interest and hide
other details by defining the applicable criteria for each field. After you apply the filtering criteria,
only entries that match the selected criteria are shown. If the system logs trusted communication
(SIC) attempts from unknown gateways, a yellow status bar opens below the filter fields.
The bottom section shows details of a row you select in the gateway list (errors that occurred, the
date the policy was prepared, verification warnings). If there is a yellow status bar, click Show
details to show the details of unknown gateways that try to connect to the Security Management
Server.
These are the different statuses in this window:
Icon Policy status
Succeeded
Succeeded
Waiting for first connection A Check Point Appliance object is configured, but the
Waiting for first connection Same as above, with warnings that attempts to establish
Pending
Pending
Warning
Information
Failed
Failed
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.70
Description
Policy installation succeeded.
Policy installation succeeded but there are verification
warnings.
gateway is not connected to the Security Management
Server (initial trust is not established).
• If a policy is prepared, it is pulled when the gateway is connected.
is not prepared
• If a policy
Prepared." When the gateway is first connected, only trust is
established.
trust failed or there are verification warnings.
The policy remains in the pending status until the gateway
successfully connects to the Security Management Server
and retrieves the policy. This status is shown only if there
was at least one successful policy installation.
For example, when the Security Management Server has
problems connecting to the Gateway (the Gateway is
unavailable for receiving communication, as in behind NAT).
Same as above but there are verification warnings.
Warning.
Information.
Policy not installed due to a verification error.
Policy installation failed.
, the Policy Type column shows "No Policy
Installation
| 26