Infinity CHECK POINT 1100 Administration Manual page 37

For example, if you set Hosts configuration to Central and Allowed: the Hosts tab on the
gateway enables you to manage the Host List of a gateway if you:
•
Provision gateways with the Host List of the Provisioning Profile
• Define a New Host List (in the Gateway window) that overrides the Provisioning Profile on
this gateway
• Define the Host List locally on the device (even if it has an assigned Provisioning Profile)
This table maps the selections in the Profile Settings to the displayed options in the Gateway
windows.
Profile Profile Override
managed
Locally Not relevant
Centrally Override denied
Centrally Override allowed
Centrally Override
mandatory
Warning - If you select Use the following settings and do not enter values for a
specified topic, the current settings on the device are deleted.
Check Point 1100/1200R/1400 Appliances Centrally Managed Administration Guide R77.20.70
Gateway Window Display and options
Settings are defined to be managed locally on the device.
To change this, refer to Provisioning Profile
(controls are unavailable)
Data must be taken from profile
(controls are Read-Only, configured by profile)
Select override method:
Manage settings locally on the device
•
override provisioning configurations with local settings.
Use profile settings
•
Use the following settings
•
individually with the values given here.
Overriding profile settings is mandatory: configure settings
here.
(Each gateway is configured separately)
Manage settings locally on the device:
•
this gateway locally.
Use the following settings
•
individually with the values given here.
: Local management;
: Enforce profile settings on this gateway.
: Manage these settings on this gateway
Manage these settings on
: Manage these settings on this gateway
SmartProvisioning
profile_name
.
| 37