Fuel Camshaft And Fork Lever Assembly; Oil Pump; Crank Gear - Kubota D1503-M Workshop Manual

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM

Fuel Camshaft and Fork Lever Assembly

1. Remove the fuel feed pump.
2. Detach the fuel camshaft stopper (1).
3. Remove the three fork lever holder mounting screws (2).
4. Draw out the fuel camshaft assembly (5), (6) and fork lever
assembly (3), (4), (7) at the same time.
(When reassembling)
• After installation, check to see that the fork lever 1 (3) and lever
2 (4) are fixed to the fork lever shaft, and that they can turn
smoothly in the holder (7).
(1) Fuel Camshaft Stopper
(2) Fork Lever Holder Mounting Screws
(3) Fork Lever 1
(4) Fork Lever 2

Oil Pump

1. Remove the nut.
2. Draw out the oil pump drive gear (2) with gear puller (1).
3. Remove the four oil pump mounting screws. Detach the oil pump
(3).
(1) Gear Puller
(2) Oil Pump Drive Gear

Crank Gear

1. Draw out the crank gear (2) with a puller (1).
2. Remove the feather key.
(1) Crank Puller
S-62
DIESEL ENGINE
(5) Injection Pump Gear
(6) Fuel Camshaft
(7) Fork Lever Holder
W1025309
(3) Oil Pump
W1025581
(2) Crank Gear
W1025476
KiSC issued 07, 2008 A