Packing, Delivering, And Handling Standard Of Dpf Filter Complete - Kubota D1803-CR-E4 Workshop Manual

DIESEL PARTICULATE FILTER HANDLING MANUAL, WSM
[7] PACKING, DELIVERING, AND HANDLING STANDARD OF DPF
FILTER COMPLETE
Follow the below procedures to pack the separated DPF filter complete and to send it to a cleaning contractor.
[Packing and delivering]
(1) Refer to the example of packaging, cover and seal the DPF filter complete with a plastic bag so that soot and ash
are not scattered in the air, and pack it in a cardboard box having cushioning material in it.
(2) Put "FRAGILE" sticker on the package.
(3) Make sure not to drop DPF filter complete when handling and carrying.
[Cautions for handling]
(1) Workers should wear a mask and goggles, and other required protective equipments according to local relevant
regulations whenever cleaning DPF.
(2) The removed soot and ash should be collected on a filter etc. and safely disposed by an industrial waste disposer
according to local relevant regulations.
[Disposal standard of DPF]
(1) DPF should be disposed by an industrial waste disposer according to local relevant regulations.
Packing and Delivering of DPF Filter Complete (Example)
1. Seal the removed DPF filter complete with a plastic bag as
shown in the photograph [A].
2. Put a cushioning material in the bottom of the prepared
cardboard box.
3. Put the DPF filter complete with the sealed plastic bag on a
cushioning material.
4. Put a cushioning material in around the DPF filter complete as
shown in the photograph [B].
5. Put a cushioning material over the DPF filter complete as shown
in the photograph [C].
6. Enclose the completed DPF Cleaning Order Form in the
cardboard box and close it.
7. Put "FRAGILE" sticker on the cardboard box.
8. Write the address and send it to a cleaning contractor.
1-S17
ENGINE
KiSC issued 09, 2013 A