ZyXEL Communications ZyXEL Dimension ES-3148 User Manual page 235

Enter " " to display a list of commands you can use.
?
sysname# ?
baudrate
boot
cable-diagnostics
configure
copy
disable
enable
erase
exit
help
history
igmp-flush
kick
logout
mac-flush
no
ping
reload
show
ssh
traceroute
write
Enter
<command> help
sysname> ping help
Commands available:
ping <ip|host-name>
<
[ in-band|out-of-band|vlan <vlan-id> ]
[ size <0-1472> ]
[ -t ]
>
sysname>
Enter
<command> ?
parameters.
sysname> ping ?
<ip|host-name>
help
sysname>
Chapter 34 Introducing Commands
Change baud rate
Perform a cold start
Execute cable diagnostics
Enter configuration mode
Backup/Restore system image and configuration
Turn off privileged commands
Turn on privileged commands
Reset system configuration
Exit from the EXEC
Description of the interactive help system
Show a list of previously run commands
Flush Igmp snooping table
Kick a session
Exit from the EXEC
Flush MAC address table
Remove configuration
Exec ping
Perform a warm start
Show system information
SSH client
Exec traceroute
Write running-config
to display detailed sub commands and parameters.
to display detailed help information about the sub commands and
destination ip address
Description of ping help
ES-3148 User's Guide
235