Table 61 Static Routing - ZyXEL Communications ZyXEL Dimension ES-3148 User Manual
Intelligent layer 2+ switch 48-port fast ethernet + 2 gigabit ethernet ports 2 gbe dual personality interfaces (copper/sfp)
Hide thumbs
Also See for ZyXEL Dimension ES-3148:
- User manual (362 pages) ,
- Release note (4 pages) ,
- Support notes (144 pages)
Table of Contents
Advertisement
The following table describes the related labels you use to create a static route.
Table 61 Static Routing
LABEL
Diffserv
DSCP to
802.1p
Mapping
0-63
802.1p Priority
Apply
Cancel
Chapter 25 DiffServ Code Point
DESCRIPTION
Click this to return to the main DiffServ screen.
In this section you map each DSCP value with an 802.1p value in the drop down list
box.
This field displays each DSCP value.
Use the drop down list box to select the IEEE 802.1p priority (0 to 7) to which you
would like to map this DSCP value.
Click Apply to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields.
ES-3148 User's Guide
185
Advertisement
Chapters
Table of Contents
Troubleshooting
