Syntax:
where
pir <Kbps>
cir <Kbps>
egress <Kbps>
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 5000Kbps.
• Set the guaranteed bandwidth allowed for incoming traffic to 4000Kbps.
• Set the maximum bandwidth allowed for incoming traffic to 8000Kbps.
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit
sysname(config-interface)# bandwidth-limit egress 5000
sysname(config-interface)# bandwidth-limit cir 4000
sysname(config-interface)# bandwidth-limit pir 8000
37.2.5 mirror
The
mirror
Syntax:
where
dir
<ingress|egress|both>
An example is shown next.
Chapter 37 Interface Commands
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
=
Sets the maximum bandwidth allowed for incoming traffic.
=
Sets the guaranteed bandwidth allowed for incoming traffic.
=
Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the switch.
command enables port mirroring on the interface.
mirror
mirror dir <ingress|egress|both>
= Enables port mirroring for incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another
or all ports for external analysis.
ES-3148 User's Guide
287